MD250MW
15mm, Cored with Carbon Brushes, Wide Voltage, Metal Gear, Mini Servo
The MD250MW is a 15mm, metal gear, Mini Servo with dual ball bearings and an efficient cored motor with carbon brushes. Engineered with a programmable digital amplifier and magnetic encoder to deliver high performance and reliability for remote, unmanned aerial vehicles and ground-based automation applications. Operating via PWM command protocol at a wide voltage range from 4.8~7.4 volts, this mighty mini actuator produces impressive torque and high speeds in its class. The MD250MW servo is ideal for a variety of applications requiring an efficient balance of performance and cost.
Part #: 40250S
$70.18
Maximum of 20 units per part # are available for purchase on our website.
Contact Sales directly to discuss purchases over 20 units:
Actuator Sales
sales@hiteccs.com
| Performance Specifications | |
|---|---|
| Command Protocol |
PWM PWM / TTL |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Weight (g) | Min: 31.00 |
| Stall Torque (kgf•cm / oz•in) |
Min: 4.9 / 68.42
Max: 7.5 / 104.72 |
| No Load Speed (sec/60°) |
Min: 0.2
Max: 0.13 |
| Running Current (mA) |
Min: 110
Max: 190 |
| Stall Current (mA) |
Min: 1000
Max: 1600 |
| Circuit |
Digital |
| Rotation |
Standard |
| Operating Voltage (V) |
Min: 4.80
Max: 7.40 |
| Torque Range |
Min (KG/CM): 7.50
Max (N/CM): 73.50 |
| Max Speed (SEC/60) | 0.13 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 15.00 |
| Dimensions (mm) | 35.0 x 15.0 x 33.0 |
| Weight (g) | 31.00 |
| Motor Type | DC (Cored Cabon Brush) |
| Potentiometer |
Magnetic Encoder |
| Gear Material | 1 Metal-Plastic & 4 Steel |
| Horn Gear Spline | H25T (25 Segment / Ø6.0) |
| Case Material | Engineering Plastic |
| IP Rating |
N / A |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
sales@hiteccs.com
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
Actuator Sales
sales@hiteccs.com
