MD65MG
11.6mm, Cored, Standard Voltage, High Speed, Metal Gear Actuator (6V)
The MD65MG is an 11.6mm, metal gear, 12-gram micro actuator featuring single output ball bearing, cored brushed motor, and contactless encoder. The MD65MG is often used in micro-sized fixed wing UAV and drone applications where space and weight are of the utmost importance. The MD65MG utilizes PWM protocol control within a standard voltage range from 4.8V to 6 volts.
Part #: 40065S
$47.19
Maximum of 20 units per part # are available for purchase on our website.
Contact Sales directly to discuss purchases over 20 units:
Actuator Sales
| Performance Specifications | |
|---|---|
| Command Protocol |
PWM PWM / TTL |
| Operating Voltage (V) |
Min: 4.80
Max: 6.00 |
| Weight (g) | Min: 11.90 |
| Stall Torque (kgf•cm / oz•in) |
Min: 1.8 / 24.99
Max: 2.2 / 30.55 |
| No Load Speed (sec/60°) |
Min: 0.14
Max: 0.11 |
| Running Current (mA) |
Min: 180
Max: 220 |
| Stall Current (mA) |
Min: 960
Max: 1200 |
| Circuit |
Digital |
| Rotation |
Standard |
| Operating Voltage (V) |
Min: 4.80
Max: 6.00 |
| Torque Range |
Min (KG/CM): 2.20
Max (N/CM): 21.50 |
| Max Speed (SEC/60) | 0.11 |
| Physical Specifications | |
|---|---|
| Case Size (mm) | 11.60 |
| Dimensions (mm) | 23.6 x 11.4 x 25.8 |
| Weight (g) | 11.90 |
| Motor Type | Cored |
| Potentiometer |
Magnetic Encoder |
| Gear Material | 1 Resin & 4 Metal |
| Horn Gear Spline | M25T (25 Segment Ø5.0) |
| Case Material | Engineering Plastic |
| IP Rating |
N / A |
Contact Sales directly for accessories and/or replacement parts:
• Case Set
• Gear Set
• Horn Set
Actuator Sales
• End Point Adjustments
• Direction
• Fail Safe
• Dead Band
• Speed (Slower)
• Soft Start Rate
• Overload Protection
• Data Save / Load
• Program Reset
Additional downloads can be found on our ACTUATOR RESOURCES page under our Support tab.
Contact Sales directly if you are unable to locate a specific resource download:
Actuator Sales
